Compliance

Accessibility in Retail Store Design: What the RPWD Act Actually Requires of Your Fixtures

By Agraj Seth5 min readLast updated:
Open appliance showroom floor with wide aisles and display counters, fitted out by Beyond Retail

Accessible design in Indian retail has quietly moved from a nice-to-have to a legal exposure. For years, barrier-free guidelines sat in the category of good practice that most fit-outs treated as optional. That changed with a Supreme Court ruling that removed the ambiguity entirely, and a fixture plan that ignores it now carries real risk, not just a missed opportunity to serve more customers.

The law is no longer a grey area

Three documents govern this in India, and it’s worth knowing all three by name. The Rights of Persons with Disabilities (RPwD) Act, 2016 creates a legal right to accessibility and places the onus on the building owner; the Harmonised Guidelines and Standards for Universal Accessibility, originally issued in 2016 and revised in 2021 by CPWD and the Ministry of Housing and Urban Affairs, is the technical rulebook that sets the actual dimensions; and the National Building Code 2016 Part 3 aligns with it. What used to be read as aspirational guidance was settled decisively in 2024: the Supreme Court’s ruling in Rajive Raturi v. Union of India made clear that RPwD Act accessibility standards are mandatory obligations, not self-regulatory guidance, and directed that completion certificates be withheld from buildings that fail to meet them. For a retail chain, that ruling is the difference between accessibility as a brand value and accessibility as a condition of being allowed to open.

Counter height: the single most common fixture failure point

Nearly every store has a service or billing counter, and this is where accessibility most directly becomes a fixture design decision rather than a civil-works one. The Harmonised Guidelines specify a dual-height approach: a lower counter section at 750mm to 800mm height to serve wheelchair users and people of short stature, alongside a standard-height section at 950mm to 1100mm for those transacting standing up, each requiring 900mm by 1200mm of clear unobstructed space in front of it. Leg space beneath the lower counter section, roughly 480mm deep, lets a wheelchair user actually get close enough to transact, rather than having to reach over an obstruction. A single-height counter, the default in most standard fixture catalogues, simply doesn’t meet this.

Shelf and product reach height

Accessibility doesn’t stop at the billing counter. Merchandise display areas intended for self-service in large-format retail should keep products within reach, with controls and operable elements placed between roughly 400mm and 1200mm from the floor to suit both wheelchair users and the general population. For a store’s standard shelving, this doesn’t mean every single shelf needs to sit in this range, but a reasonable share of frequently purchased or everyday items should, so a wheelchair user has genuine self-service access rather than needing to ask staff for everything above or below a narrow band.

Ramps: the dimension that drives the floor plan, not just the entrance

What this costs, realistically

The honest answer is that it’s a modest incremental spend on a new fit-out, not a dramatic one. The real cost typically sits in a narrow band: a dual-height counter section in place of a single standard one, wider doorways, tactile and contrast flooring at level changes, and a few height-adjusted fixture or signage elements, far cheaper to build in at the design stage than to retrofit afterward. The expensive version of this is always the retrofit, tearing out a finished fixed counter to rebuild it at a dual height, rather than specifying it correctly in the first brief.

A short accessibility brief for a new store

  • A dual-height counter section, 750-800mm low and 950-1100mm standard, with 480mm leg space below the lower section
  • A meaningful share of everyday shelf product kept within the 400-1200mm reach zone
  • Any ramp built to a 1:12 gradient, 1200mm minimum width, with landings and double handrails as required
  • Door and aisle clear widths checked against the 900mm minimum
  • Tactile or contrast flooring specified at any level change, as part of the original fixture and flooring brief, not added afterward

Beyond Retail designs custom retail fixtures and 3D layouts in-house, which means accessibility dimensions like a dual-height counter can be built into the fixture drawings from the first design pass rather than retrofitted later. If you’re planning a new store and want the accessibility brief checked into the fixture design from the start, share your layout and the counter, shelving and clearance dimensions can be confirmed against the Harmonised Guidelines before fabrication.

A
Agraj SethWrites for Beyond Retail, the Delhi NCR retail design and execution company building fixtures, signage and turnkey showrooms since 2003.

Keep reading